이미지 확대/축소가 가능합니다.

배터리 충전기 별매

1 / 10의 손쉬움으로 1 / 8 클래스의 주행! 2.4GHz 프로 포 탑재가 끝난 상태!
롱 휠 베이스화 등등에서 2.0으로 진화 한 새로운 시대의 전동 버기!

시작에서 샘솟는 토크 감. 그리고 고속 영역이 되어도 줄지 않는 성장의 좋은 점. 이 주행에는 상상을 아득하게 넘는 박진감 넘치고 있습니다. 호평을 얻고있는 새로운 시대의 전기 레이싱 버기 DBX VE에 1 / 8 클래스 상응하는 롱 휠베이스와 트레드 1 / 8 타이어 & 휠을 표준 장비. 풀 타임 4WD 섀시와 ORION 제 소용돌이 브러시 항상 회전 쿨링 팬 장착의 ESC 등이 함께, 굉장한까지의 주파력을 발휘. 그래서 1 / 10 클래스 특유의 취급하기 쉬움을 겸비하고있어 부담없이 새로운 시대의 전기 레이싱 버기 주행을 즐길 수 있습니다. 1/8GP 유모차 용 코스도 가까운 러프로드에서도 그 실력을 최대한 당겨 가슴이 비처럼 흥분을 제공합니다. 또한 시장에 풍부하게 준비되어있는 1 / 8 버기 용 타이어를 장착 할 수 있으므로, 코스에 맞춘 세팅도 즐길 수 있습니다. 게다가 모든 것이 공장 완성하고있는 레이디 세트. 2.4GHz 조종기를 표준 장비하고 스위치를 넣는 것만으로 곧바로 주행 가능. 클래스를 넘은 새로운 시대의 주파력을 마음껏 즐길 수 있습니다.

쿄쇼 만이 가능한 실적에 뒷받침 된 노하우를 투입 한 낮은 위치 배치의 센터 샤프트 드라이브 3 통화를 조합 한 풀 타임 4WD 새시.

세련되고 강성이 뛰어난 5 개 스포크 휠과 마이크로 스퀘어 패턴 타이어를 표준 장비. 모두 1 / 8 클래스의 인파 노 그대로의 사양.

3 셀 Li-Po 배터리에도 대응하는 일체 박스 타입의 배터리 룸을 채용. 충격에 강하고, 배터리를 단단히 확실하게 고정.

3 개의 나사를 푸는 것만으로 백래쉬 조정 가능한 알루미늄 제 마운트에 "ORION VORTEX 10 EVO"브러시리스 모터를 탑재.

스위치를 넣는 것만으로 중립 위치를 자동 설정하는 조정 불필요하고 항상 회전 쿨링 팬 첨부의 ESC "ORION VORTEX R10 SPORT」를 탑재 됨.

전후 좌우의 사스 암, 전후 너클 전후 단파 스테이를 공통으로 유지 보수성을 높인 공 연결 서스펜션을 채용.

깊은 스트로크의 더블 위시 본 서스펜션이 부드러운 주행을 실현. 리아 타이로드의 처리를 전방 측으로 유지 보수성을 향상.

정평의 공력 바디와 윙에는 형광 옐로우와 골드의 두 가지 기본 색깔의 데칼 포함. 기호에 맞춘 어레인지가 가능. 【이미지는 골드 어레인지】

  • 1 / 10 클래스 특유의 취급하기 쉬움을 진화시켜, 한층 더 1 / 8 클래스 상응하는 역동적 인 주행 성능을 획득.
  • 시장에서 풍부하게 판매되고있는 각종 1 / 8 클래스 용 타이어와 휠을 장착 가능.
  • 차량 높이 조절 가능한 다이얼 식 어 저스터 장비의 대용량 오일 뎀퍼를 표준 장비.
  • 섀시 사양에 최적화 된 장력 스프링을 장착 됨.
  • 강력한 디지털 서보를 채용하여 뛰어난 조종성을 획득.
  • 높은 강성과 강도를 갖게 한 빅 사이즈 센터 샤프트와 각 바퀴의 스윙 샤프트를 채용.
  • 차고 나 캠버, 트레드, 프런트 & 리어의 토인 등이 세팅 할 수있는 서스펜션을 시작해 각처의 세팅이 가능.
  • 1 / 8 타이어 채용에 맞게 기어비를 최적화.
  • 선명한 색상을 실시, 높은 공력 효과를 발휘하는 색상 & 컷이 끝난 프린트 보디를 부속.
  • 기호에 맞추어 선택할 수있는 2 색의 데칼을 포함

<레디 셋 내용>

  • 2ch 1 서보 1ESC R / C 유닛 탑재 된 공장 완성 새시
  • 파 펙스 K-T100 송신기
  • 색상이 다한 토너 바디
  • 팀 오리온 VORTEX 10 EVO 브러시리스 모터 탑재 됨
  • 팀 오리온 ORION VORTEX R10 SPORT ESC 탑재 됨
  • 십자 렌치

<주행에 필요한 것>

  • 주행 용 배터리 / 슈퍼 플러그 타입 7.2 ~ 8.4V 니켈 수소, 7.4 ~ 11.1V Li-Po
  • 충전기
  • 송신기 용단 3 알칼리 건전지 4 개
샤시 테크니컬 데이터
전장
475mm

300mm
전체 높이
154mm
휠베이스
320mm
트레드 (F / R)
246mm
타이어 (F / R)
Φ115 × 45mm
기어비
9.46:1
완비 중량
약 2,370 g (바디 포함)
모터
오리온 VORTEX 10 EVO 브러시

Handy 1/10 size but drives like a 1/8 class! 2.4GHz R/C system pre-installed!
Evolution of the next generation 2.0 electric buggy with longer wheelbase!

Feel the adrenalin rush with the first burst of high-torque acceleration! As the machine extends relentlessly through the power band, the surge of acceleration will leave you breathless. Similar wheelbase and tread to 1/8 class machines with the same wheels and tires generate the DBX VE 2.0 electric buggy갽s breathtaking racing potency. The full time 4WD chassis is powered by the dynamic combination of the ORION Vortex brushless motor and ESC with a constantly rotating cooling fan. Advanced design meshes with ease-of-use so you can enjoy both the audacious performance of a 1/8 class racer with the user-friendliness of 1/10 class on any 1/8 GP buggy race course or the local off-road track.?With the full variety of tires available on the market for 1/8 buggies able to be fitted, tire selection to suit different types of tracks adds even more performance and fun. The DBX VE 2.0 comes packaged as a fully assembled Readyset equipped with a 2.4GHz R/C system that becomes operational as soon as it is switched ON. Take charge of the new generation DBX VE 2.0 and form a lethal racing combination for a long time to come.

Full-time 4WD chassis incorporates all of Kyosho갽s formidable resources and know-how in the development of this low center of gravity shaft-driven 3-differential drive train.

Equipped with stylish but strong 5-spoke wheels and micro square pattern tires. Both are 1/8 class Inferno specification.

One-piece box type battery room also suits 3-cell Li-Po batteries. Provides secure fitting to resist external shocks.

ORION VORTEX 10 EVO brushless motor is pre-fitted on an aluminum die cast motor mount and allows gear backlash to be easily adjusted with just three screws.

Equipped with ORION VORTEX R10 (with cooling fan) ESC that automatically sets its neutral position when the power is switched on.

Ball-connected suspension features interchangeable suspension arms, front-rear knuckles and shock stays for optimal maintenance efficiency.

Deep stroke double wishbone suspension delivers smooth performance over rough surfaces. Maintenance is improved by positioning the rear tie-rod around to the front side.

Includes 2.4GHz Syncro KT-200 R/C system featuring dual-rate and failsafe functionality.

Includes 2 graphic decals which can be applied to customize the slick aerodynamic body.

  • Retains the user-friendliness of 1/10 class but with dynamic 1/8 class running power.
  • Full range of 1/8 class wheels and tires available on the market can be installed.
  • Equipped with large capacity oil shocks that also provide dial adjustment of chassis height.
  • Equipped with pre-installed shock springs with spring tension optimized to match chassis specifications.
  • Utilizes powerful digital servo to achieve the excellent controllability.
  • Equipped with strengthened high-rigidity large center shaft as well as swing shafts on all four wheels.
  • Includes aerodynamic pre-cut body complete with printed color scheme.
  • Wide scope for setting adjustments include: chassis height; camber; tread; front & rear toe-in, and shock mounting positions.
  • The gear ratio is optimized for 1/8 class tires.
  • Includes aerodynamic pre-cut body complete with printed color scheme.
  • Includes decals for two color schemes.

걙 ReadySet Contents 걚

  • Factory assembled chassis with 2-channel, 1-servo, 1-ESC R/C unit
  • Perfex KT-100 transmitter
  • Pre-painted body
  • Pre-installed Team Orion VORTEX 10 brushless motor
  • Pre-installed Team Orion VORTEX R10 ESC
  • Cross wrench

걙 Required for operation 걚

  • Battery for chassis/ 7.2-8.4V Ni-MH or 7.4-11.1V Li-Po battery with super plug connector
  • Battery charger
  • 4 x AA-size alkaline batteries for transmitter
Chassis Technical Data
Length
475mm
Width
300mm
Height
154mm
Wheelbase
320mm
Tread (F/R)
246mm
Tire(F/R)
꺍115?45mm
Gear Ratio
9.46갌1
Weight
2,370g걁with body걂
Motor

Orion Vortex 10 Evo brushless

?