이미지 확대/축소가 가능합니다.


정밀 섀시 무게
2 섀시 무게 균형 및 장착 하드웨어의 완전한 세트. 수 섀시 전면에 드릴을 사용하여 미리 뚫어 놓은 구멍에 장착하는 XRAY의 T1을 위해 설계하지만,뿐만 아니라 다른 자동차 경주를 맞는다. 황동에서했다.


Precision chassis weights
A complete set of 2 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the front of the chassis but fits any other race car as well. Made from brass.


 

무게의 균형을 사용하는 방법 : 
정밀 밸런싱를 들어, HUDY (# 107880)에서 간단한 균형 도구를 사용합니다. 섀시의 중심선을 따라 드릴 두 개의 구멍에 섀시를 배치합니다.

How to use balancing weights:
For precision balancing, use the simple balancing tool from HUDY (#107880). Place the chassis on the two holes drilled along the centerline of the chassis.


 

섀시 한쪽으로 떨어지면 균형없고, 중량을 다른쪽에 첨가 될 필요가있다. 양쪽이 동일한 중량을 갖고, 섀시 균형 도구에 배치 할 때 섀시 레벨을 유지하도록 섀시 균형 다음 밸런스 웨이트 중 하나를 사용한다.

If the chassis falls to one side, it is not balanced, and weight needs to be added to the other side. Use one of the following balancing weights to balance the chassis so that both sides have the same weight, and chassis stays level when placed on the chassis balancing tool.


 

무게는 섀시의 전면에 드릴을 사용하여 미리 뚫어 놓은 구멍에 장착되어야한다. (1) 무게가 5g에 동일

The weights should be mounted to the pre-drilled holes at the front of the chassis.1 weight equals to 5g