이미지 확대/축소가 가능합니다.

 

 

 

 

 

 

 

2015 ROAR Nationals Champion!
 

The Team Associated TC7 Factory Team Touring Car Kit is Associated's most refined kit to date! The RC10TC7 FT car kit comes packed full of Factory Team options and a refined suspension package that provides precise adjustments, resulting in an unequalled level of consistency. The RC10TC7 FT car kit arrives including all the Factory Team test parts Area 51 has had in the works for the last several years.

The focus was on a more precise feel with updates in suspension component composites and ultra-smooth FOX shocks with Genuine Kashima Coat. The floating servo controls an updated dual bellcrank steering system with a low center of gravity and refined Ackermann range, which allows the most direct steering feeling for any track condition. The updated motor mount is centrally located to produce the most consistent chassis flex to help keep cornering predictable. Accurate gear alignment provides high efficiency, acceleration and top speed.


The RC10TC7 FT gives you all the key features and options necessary to keep you at the top of the racing circuit, all without sacrificing affordability. After the prototype swept the modified podium at 2015 R.O.A.R. Paved On-Road Nationals, it's easy to see that the RC10TC7 FT kit is another Champion by Design from Team Associated!

 

2015 ROAR 내셔널 챔피언!
 

팀 관련 TC7 공장 팀 투어링 자동차 키트는 현재까지 관련의 가장 세련된 키트입니다! RC10TC7 FT 자동차 키트는 공장 팀 옵션과 일관성의 필적 할 수준의 결과로, 정확한 조정을 제공하는 세련된 서스펜션 패키지의 전체 포장되어 있습니다.
RC10TC7 FT 자동차 키트 지역 (51)는 지난 몇 년 동안 작품에 있었다 모든 공장?? 팀의 테스트 부분을 포함하여 도착한다.

초점은 정품 가시 마 코트와 서스펜션 구성 요소 복합 재료와 매우 부드러운 FOX 충격에 업데이트보다 정확한 느낌이었다. 플로팅 서보는 트랙 조건의 가장 직접적인 조향 감을 수 중력 정제 아커 범위의 낮은 중심으로 업데이트 이중 벨 크랭크 스티어링 장치를 제어한다. 업데이트 된 모터 마운트는 중앙 예측 코너링 유지할 수 있도록 가장 일관된 섀시 플렉스를 생산하기에 위치해 있습니다.
정확한 기어 정렬은 높은 효율, 가속과 최고 속도를 제공합니다.


RC10TC7 FT는 모든 경제성을 희생하지 않고, 당신 경주 회로??의 상단에 당신을 유지하는 데 필요한 모든 주요 기능과 옵션을 제공합니다. 프로토 타입은 2015 R.O.A.R.에서 수정 된 연단을 휩쓸 후 포장 온로드 국민, 그것은 RC10TC7 FT 키트는 팀 관련에서 디자인하여 다른 챔피언임을 쉽게 알 수!

 

TC7 FT Features:


?Updated suspension geometry
?FOX? shocks with Genuine Kashima? Coat
?New one-piece motor mount
?Updated drive belts
?Updated dual bellcrank steering system
?Floating servo mount
?Narrow chassis with optimized flex characteristics
?Vertical ball stud bearing caps
?Rear gear diff for maximum performance and minimal maintenance
?Front spool with replaceable composite outdrives
?Titanium turnbuckles with turnbuckle eyelets for easy access to ball stud for adjustment
?22 precision ball bearings

 

TC7 FT 특징 :


? 업데이트 된 서스펜션 구조
정품 Kashima? 코트 ? FOX? 충격
? 새로운 일체형 모터 마운트
? 업데이트 드라이브 벨트
? 업데이트 된 이중 벨 크랭크 스티어링 시스템
? 서보 마운트 부동
? 최적화 된 플렉스 특성을 갖는 좁은 섀시
? 수직 스터드 베어링
최대의 성능 최소한의 유지 보수 ? 후면 기어 DIFF
? 교체 복합 outdrives 전면 스풀
조정 스터드에 쉽게 액세스 할 턴버클 작은 구멍을 가진 ? 티타늄 턴버클
? 22 정밀 볼 베어링

 

Specifications: 


Scale: 1:10
Power: Electric
Length: 360mm / 14.2in
Width: *Varies
Weight (chassis only): *515g / 1.14lbs
Wheelbase: 253.5mm-257.5mm / 9.9in-10.1in
Drive: 4WD
*NOTE: Final width and weight will vary with the actual electronics and tires used to complete the RC10TC7 FT Kit

 

명세서:
규모 : 1시 10분
전원 : 전기
길이 : 360mm / 14.2in
폭 : * 다름
무게 (섀시 ) : * 515g / 1.14lbs
휠베이스 : 253.5mm-257.5mm / 9.9in - 10.1in
드라이브 : 4WD
* 참고 : 최종 폭과 무게가 RC10TC7 FT 키트를 완료하는 데 사용되는 실제 전자 제품과 타이어에 따라 달라집니다

 

Needed to Complete:

?1/10 scale electric motor & electronic speed control
?7.4V LiPo or 6.0V LiFe battery
?Battery charger compatible with chosen battery chemistry
?2-channel surface transmitter, and its batteries
?2-channel receiver
?Steering servo
?1/10 scale (190mm) polycarbonate touring car body
?Polycarbonate specific spray paint for body

완료하는 데 필요한 :

? 10분의 1 규모 전기 모터 전자 속도 제어
? 7.4V 리튬 폴리머 또는 6.0V 수명 배터리
선택된 배터리 화학와 호환 ? 배터리 충전기
? 2 채널 표면 송신기 배터리
? 2 채널 수신기
? 스티어링 서보
? 10분의 1 규모 (190mm) 폴리 카보네이트 여행 차체
? 폴리 카보네이트 특정 스프레이 페인트