A great truggy starts with a great buggy. The 8IGHT-T™ 3.0 truggy benefits from the same engineering and expertise that made the 8IGHT™ 3.0 buggy a ROAR National Champion. Everything from the suspension geometry to the body and wing design has been refined so it is easier for racers of all skill levels to drive faster and lower lap times. This superb handling, combined with ability to handle the most powerful engines and toughest tracks, make the 8IGHT-T 3.0 truggy a true contender for the world stage.

Improved Suspension Geometry
The suspension geometry is refined to give racers of all skill levels a neutral handling truggy that is easy to drive fast. 15-degree, non-inclined caster blocks raise the spindle, allowing the vehicle to soak up bumps with less dog bone plunge. Redesigned front arms improve front wheel clearance and increase steering throw. Camber and shock locations on the shock towers are optimized for quick and easy tuning.

16mm Shocks and Tapered Springs
The large bore shocks are easier to tune and include machined tapered pistons and shock bushings for greater precision. The tapered shock springs provide more spring-to-arm clearance and a progressive rate that keeps the ride plush over rough sections of track while still providing plenty of bottoming resistance for landing large jumps. Larger volume bladders with improved durability are also included.

Optional Parts Included
The kit comes with an impressive collection of optional parts that includes lightweight outdrives, a lightweight spur gear, adjustable hinge pin braces, a hard-anodized flywheel, an aluminum servo saver top, aluminum rear bearing inserts and more.

Gen 3 Radio Tray
The Gen 3 Radio tray provides better weight distribution and helps prolong servo life with molded index points that improve linkage alignment. A ball bearing-mounted throttle tri-horn keeps engine response smooth and precise. The switch location has been moved for easier access and the metal J-nut that secures the battery box reduces wear on the radio tray from chassis flex.

Improved Body and Wing
The body is a refined version of the revolutionary 8IGHT-T 2.0 truggy’s cab forward body. It’s complemented by a new rear wing with larger side plates that improves air flow and provides greater down force. An optional wickerbill system is included so you can fine tune stability for different track conditions.

별도로 필요한것...
- .21급 아니면 28급 엔진
- 1/8스케일 매니폴드
- 송수신기 세트
- 수신기배터리
- 스타트박스
- 부스터
- 연료(25%)
- 연료쭉쭉이
- 도색연료(PS)
- 조립공구
- 1/8 트러기타이어,순간접착제

Type: 1/8th Nitro Truggy
Scale: 1/8
Length: 18.75 in (476mm)
Width: 16.38 in (416.1mm)
Height: 7.30 in (185.5mm)
Wheelbase: 14.93-15.09 in (379-383mm)
Chassis: 4mm Plate, 7075-T6 Aluminum
Suspension: 4-wheel Independent
Drivetrain: 4WD
Motor or Engine: .21-.28 Nitro Engine
Gear Pitch: 1.0 MOD
Kit/RTR: Kit
Shock Type: 16mm bore with Bladders
Body: 8IGHT-T 3.0 Body
Ball Bearings: Full Precision Ball Bearings
Fuel Tank Capacity: 150cc
Experience Level: Intermediate
Assembly Time: 3-5 Hours

메뉴얼->클릭

분해도->클릭

부품리스트->클릭

컨버전후 예상참고사진 모터변속기는 별도로 구매필요